Select Page

Insta-Lock Snap Davit System

£196.50

Standard Length Kit

Insta-lock Snap Davits are a lock and lift system, designed to secure and stabilise an inflatable dinghy to the back of a Motorboat or Yacht.
A Practical Design made to be Strong and Long Lasting. Safe and Secure, with a Spring Loaded Lock Action.
Marine Grade 316 Stainless Steel Construction with Grey reinforced Rubber Pads

Category:

Description

INSTA-LOCK SNAP DAVIT KIT 

Standard Length Kit (please see images for the extended kit as an alternative installation option)

Insta-lock Snap Davits are a lock and lift system, designed to secure and stabilise an inflatable dinghy to the back of a Motorboat or Yacht. 

A Practical Design made to be Strong and Long Lasting. Safe and Secure, with a Spring Loaded Lock Action. 

Marine Grade 316 Stainless Steel Construction with Grey reinforced Rubber Pads 

 • Insta-lock Snap Davits provide a safer method for a person to enter and exit a dinghy. 

 • When locked on, the dinghy can be lifted out of the water to a vertical storage position. 

 • When locked and lifted, your dinghy avoids drag and fouling when cruising. 

 • When locked and lifted, you can save space in the Marina and save on Berthing fees.

What’s in the Box.

The INSTA-LOCK kit comprises of 2 spring loaded davit heads which secure to the Swim Platform and 2 Pads with lock-on-bars which are glued onto the Inflatable. When aligned the sprung loaded davit heads snap onto the lock-on-bar. The dinghy is firmly locked to the Host Craft ready for lifting or loading with passengers.

The Insta-Lock System comes with D.I.Y friendly instructions (Adhesive Required).

NOTE:- YOU CAN PREVIEW THE INSTA-LOCK INSTRUCTIONS HERE

The Davit Heads are bolted to the swim platform or Transom step and the Rubber Pads are Glued to the Inflatable Dinghy Tubes, the process is fully explained.

ADHESIVE – Hypalon or PVC Adhesive? 

It is important to know that Hypalon and PVC inflatable Dinghies require different Adhesive.

Hypalon Dinghy – Use Adhesive and Solvent Cleaner:

• 2990 Hypalon 2 part Adhesive 

• P510 Cleaner and Solvent for Hypalon Fabrics. 

• From Polymarine or equivalent.

PVC Dinghy – Use PVC Adhesive, Solvent Cleaner and Hypalon Adhesive as a Rubber Pad Primer: 

• 3026 PVC 2 part Adhesive, 

• 2903 Solvent and Primer For PVC Fabrics 

• 2990 Hypalon Adhesive to prime rubber pad 

• From Polymarine or equivalent.

Note; FOR PVC DINGHIES ONLY! 

Pre preparation – The back of the rubber pads will need to be primed with a thin layer of Hypalon adhesive before proceeding with instructions for using PVC adhesive.

Reviews

There are no reviews yet.

Be the first to review “Insta-Lock Snap Davit System”

Your email address will not be published. Required fields are marked *

This website is being upgraded — no orders shall be fulfilled at the moment, please come back soon for our best offers yet! Dismiss